rfs@rfsales.com.au
+61(0)2 9545 4433

NDT Inspection Point Labels

NDT Inspection Point Labels

NDT Inspection Point Labels are high quality Test Measurement Location (TML) labels to designate Ultrasonic Testing read points on non-insulated pipe and equipment.

Request a Quote

Description

NDT Inspection point labels are designed to identify and access Thickness Measurement Locations (TML’s) on insulated and non-insulated pipe and equipment to monitor structural integrity. These products are used in the Process Safety Management and Mechanical Integrity efforts underway in the refining, chemical, petrochemical, paper and pulp, household products, food processing, and transportation industries.

These labels feature:

  • High Quality Thickness Measurement Location (TML) Labels for Pipe and Equipment Process Safety Management
  • Low-Leachable, High-Strength Adhesive
  • Temperature Resistance -40 F to +300 F (-40 C to +149 C)

Standard Label Product Descriptions

Label “A” – Measures 3″x 3.875″ with a 1.25″ diameter opening for inspection and blank spaces for on-site inscription. A 7.0 mil environmental protectant laminate is supplied as an integral part of the label with a removable tab to overlay the inscribed marking. The standard label is bright orange. Wording: “DO NOT REMOVE”, “NDT INSPECTION POINT”.
Label “B” – Measures 2″x 3″ with blank spaces for on-site inscription. A 4.0 mil environmental protectant laminate is supplied as an integral part of the label with a removable tab to overlay the inscribed marking. The standard label is bright orange. Wording: “DO NOT REMOVE”, “NDT INSPECTION POINT”.

Label “C” – Measures 1″x 2″ with a .75″ diameter opening for inspection and a blank space for on-site inscription. A 3.0 mil environmental protectant laminate is included. The standard label is bright orange. Wording: “DO NOT REMOVE”, “NDT PT.”.

Label “D” – Identical to Label “C” with a 4.0 mil environmental protectant laminate supplied as an integral part of the label with a removable tab to overlay the inscribed marking.
Label “E” – Measures 1.5″ in diameter with a 4.0 mil environmental protectant laminate. The standard label is bright orange. Wording: “TML LOCATION”, “DO NOT REMOVE”.
Label “F” – Measures 1.25″ in diameter with a .75″ diameter opening. A 4.0 mil environmental protectant laminate is applied at the factory. The standard label is bright orange. Wording: “UT LOCATION”, “DO NOT PAINT”.
Label “H” – Measures 1.5″x 1.5″ with a .625″ diameter opening and a blank space for on-site inscription. A 4.0 mil environmental protectant laminate is supplied as an integral part of the label with a removable tab to overlay the inscribed marking. The standard label is bright green. Wording: “DO NOT PAINT”, “NDT POINT”.

General Specifications

  • The typical label stock is 3.5 mil matte silver mylar polyester material. The matte coating resists degradation from scuffing, chemicals, moisture and wide temperature fluctuations.
  • The adhesive is a high performance acrylic for excellent bonding to metals, HSE plastics and a wide variety of painted surfaces.
  • Leachable chloride, fluoride and sulfur in the adhesive, as measured by ion chromatography – PPM – is 3, less than one, and less than one, respectively.
  • Typical values for continuous temperature resistance range between -40F and 300F. Minimum application temperature is 58F.

Options and Accessories

  • NDT Inspection Point Tags:NDT Inspection Point Tags are designed as an accessory TML identifier for use with NDT Inspection Plugs. They are constructed of .036″ 304 stainless steel with a mill finish and a 3/16″ screw hole along one side for installation. The tags are designed for on-site stamping or inscription of TML identifiers. Two standard sizes are stocked: 1″ x 2″ and 1″ x 3″. Other sizes, shapes and materials will be quoted on request.
  • NDT Inspection Point Markers:NDT Inspection Point Markers are the industrial version of the Sanford Sharpie for use on both NDT Inspection Point Labels and Tags. This fine point marker is specially formulated for industrial and commercial use. The super permanent formula resists bleeding and fading on glass, metal and plastic surfaces when exposed to extreme heat and steam ( up to 500F), processing chemicals and cleaners and UV light. Black ink pens sold in boxes of 12.
  • Custom Labels:Standard labels can be special ordered in any color or language that best suits your needs. Custom designed labels will be quoted on request.

Download Brochure

Click here to Download Brochure

Title

Go to Top