rfs@rfsales.com.au
+61(0)2 9545 4433

EchoMix Powder Ultrasonic Couplant

EchoMix Powdered UT couplant is easily mixed in ambient water in five minutes, providing a strong, continuous coupling film that adheres well to vertical and overhead surfaces.

EchoMix provides an economical solution for travel, remote access inspections and storage limitations.

Request a Quote
SKU: CO-EchoMix Category:

Description

Description

  • 2-Part Powder (two packets)
  • Blue mixing tracer
  • Strongest coupling film of powder couplants.
  • Salt stable – will not thin with corrosion salts or in marine or highway environments.
  • Fast, easy removal with water.
  • Low toxicity and low environmental impact.
  • Compact for shipping and storage.
  • Easy mixing, fast gel time in ambient temperature water (5 minutes to final product).
  • Packaging: 1 and 5 gallon easy to open and easy to use powder packets.
  • Corrosion inhibition: Contains mild short term Ferrous Corrosion Inhibitors.

Working with EchoMix

  • To lower the freezing point to -26 F (-32 C), raise the operating temperature to 250 F and extend drying time:
  • Mix the large “A” packet into two quarts of water as directed.
    DISCARD the small packet “B” and replace with two quarts of propylene glycol formula anti freeze, following the same directions for “B” packet. (“B” packet is not used when adding antifreeze) The couplant will thicken within 60 seconds; therefore, add the anti-freeze smoothly and mix completely within the 60 second window.
  • Appropriate propylene glycol anti-freezes include Sierra Antifreeze coolant, Amsoil Propylene Glycol Antifreeze, Prestone Low Tox and are designated as less toxic to animals and pets.
  • Do not use ethylene glycol antifreeze or methyl alcohol. These chemicals are toxic to the environment, dangerous to animals and will not work with EchoMix.
  • When using propylene glycol antifreeze, the viscosity of prepared EchoMix will be higher than when mixed with 100% water. Therefore, use ½ packet for medium viscosity and 2/3 packet for high viscosity gel.

Specifications

  • Operating Range
    32˚ to 120˚F (0˚ to 50˚C)
  • Corrosion Characteristic
    Contains mild short term Ferrous Corrosion Inhibitors
  • Compliance
    ASME Boiler & Pressure Vessel Code (T-533)
    FAA-AC # 25-29 (glycerin-free)
    NAVSHIPS 250-1500
  • Halogens and Sulfur
    Less than 0.02% (200 ppm)
  • pH
    9
  • Viscosity
    Medium Gel
    Viscosity of 1 gallon mixture: 23,000 CPS, Brookfield #4 Spindle, 6 rpm

Download Brochure

Click to Download Brochure

View Safety Data Sheet

Click here to view Safety Data Sheet

Title

Go to Top