Certified MPI Test Block Weights

Certified MPI Test Block Weights
  • 4.5kg block measures 230mm x 50mm x 50mm for use with A.C. Electromagnetic yokes
  • Stamped with serial number and actual weight.
  • Includes certificate
  • In accordance with Australian Standard AS1171 (see below)

AS1171-1998
Section 2

2.2.2 - Permanent magnets and D.C. electromagnets Unless otherwise specified, permanent magnets and D.C. electromagnets (D.C. yokes) shall be capable of lifting not less than 18 kg of mild steel at a pole spacing of between 75 mm and 300 mm.
2.2.3 - A.C. electromagnets Unless otherwise specified, A.C. electromagnets (A.C. yokes) shall be capable of lifting not less than 4.5 kg of mild steel at a pole spacing of between 75 mm and 300 mm.
Notes:

  1. As the strength of magnetization resulting from the use of d.c. electromagnets and especially permanent magnets is relatively low, this type of equipment should only be used where other methods of magnetization are not available or are unsuitable.
  2. The lifting test pieces applicable to Clauses 2.2.2 and 2.2.3 are manufactured from a rectangular bar with one face at least 30 mm wide. The steel should be similar in chemical composition to grade 1020 of AS 1442 and be in the annealed condition.

Download a Brochure:

N/A

Request a Quote:

Click here to request a quote for this product

RFS Item Code
MPI DPI OTHER:CAL-MPI
Certified MPI Test Block Weights
RFS Item Code: MPI DPI OTHER:CAL-MPI
RFS Item Code
MPI DPI OTHER:CAL-MPI