Angled wedges for use with the ToFD (Time of Flight Diffraction) probes and scanners.
PHOENIX TOFD Wedges
Description
Phoenix produces a wide range of Time of Flight Diffraction wedges manufactured from durable plastic, brass or stainless steel. The wedges fit the universal Metric Threaded probes (M12, M20 and M30) and are suitable for use with the Phoenix range of TOFD probes. All TOFD wedges are supplied with M3 irrigation channels as standard.
Specifications
- Sound Velocity: 2320m/s
- Beam angles specified are for longitudinal waves
- Nozzle fits a 2.5-3mm tube
- Gimbal centre is 7.00mm from wedge base
- Gimbal is 5mm Ø x 3.85mm long (hex 3mm key)
- All wedges are irrigated as standard and can be coupled with couplant gel or water as required
Accessories
- Wear Plates or Couplant Skids must be ordered with the wedge as the addition of M3 x 5 deep hole is required. Wear plates are available for the front and rear of the wedge.
- Side Skids are available but incompatible with tool-post applications
Couplant must be applied to the probe face and the wedge shoe during use (this can be pumped or applied manually). Phoenix Inspection Systems Limited assumes no responsibility, explicit or implicit, if these results are found to vary under different test conditions.
| Product Code | Beam Angle | Thread Size | To Fit Probe Types | W x L (mm) | Wedge Delay (mm) | Wedge Delay (µs) | Emission point (mm front) |
| WTOF 12/45 | 45° | M12 | M12 DTOF and CDTOF 3-6 mm Ø |
30 x 20 | 7.1 | 3.06 | 8 |
| WTOF 12/60 | 60° | M12 | M12 DTOF and CDTOF 3-6 mm Ø |
30 x 20 | 7.1 | 3.06 | 8 |
| WTOF 12/70 | 70° | M12 | M12 DTOF and CDTOF 3-6 mm Ø |
30 x 20 | 7.0 | 3.01 | 8 |
| WTOF 20/45 | 45° | M20 | M20 DTOF and CDTOF 9-12 mm Ø |
30 x 30 | 8.1 | 3.42 | 13 |
| WTOF 20/60 | 60° | M30 | M20 DTOF and CDTOF 9-12 mm Ø |
30 x 30 | 7.5 | 3.25 | 13 |
| WTOF 20/70 | 70° | M20 | M20 DTOF and CDTOF 9-12 mm Ø |
30 x 30 | 7.5 | 3.25 | 13 |
| WTOF 30/45 | 45° | M30 | M30 DTOF and CDTOF 20 mm Ø |
40 x 45 | 7.5 | 3.25 | 20 |
| WTOF 30/60 | 60° | M30 | M30 DTOF and CDTOF 20 mm Ø |
40 x 45 | 7.5 | 3.25 | 20 |
| WTOF 30/70 | 70° | M30 | M30 DTOF and CDTOF 20 mm Ø |
40 x 45 | 7.5 | 3.25 | 20 |