-
Phoenix’s high performance transducers are reliable, reproducible and cost effective and all are made to quality standards such as: EN12668, BS EN ISO 9001:2008, ESI, DIN, AWS and ASTM. Review the catalogue below for the full Phoenix transducer collection. -
Sonatest produce a large range of Ultrasonic transducers, including Conventional and Phased Array UT -
Cygnus gauges have a wide range on single and twin crystal probes available. -
Range of probes available for the Dakota Ultrasonic Thickness Gauges -
Cables for connecting Ultrasonic Transducers to Ultrasonic Flaw Detectors. Available in single and twin cables, with a range of connector options. -
Single crystal probes are used with the gauge in Multiple-Echo mode and allow measurements to be taken ignoring coatings. -
Twin crystal probes are used with the Cygnus gauges in Echo-Echo or Single Echo modes. These types of probes are particularly suited to measuring on heavily corroded metals. -
High-Temperature Twin element probe for the Cygnus 1 Ex ultrasonic thickness gauge. Temperatures up to 300°C. -
Twin element High Temperature Probe for use on surfaces up to 300°C. For use with Cygnus 4+ and Cygnus 6+. -
Single crystal compression wave probes are used to measure thickness and detect flaws on plates, bars, forgings and castings. -
Single crystal 0° compression wave probe with hard face (ceramic) for long life. Very good sensitivity and resolution. For use on smooth and machines surfaces. -
Twin crystal compression wave probes are suitable for use on corroded and pitted surfaces, thickness measurement, brazed joint testing and for lamination detecting. High gain and resolution are achieved with a very low cross-talk. -
The single crystal range of shear wave transducers are available in various angle sizes and ideal for the general purpose testing of welds, plate, pipe tubing, castings and forgings. -
Angle beam shear wave probe with high perfomance Ø10 mm single crystal in stainless steel housing, offering exceptional sensitivity and high resolution for exact and critical inspections. -
Twin crystal shear wave transducers hold two crystals mounted at inward angles that provide improved near-surface resolution and superior signal-to-noise ratio. Ideal for inspecting thin materials for small flaws, occurring directly under the surface. -
Angle beam twin crystal probe with 8 x 5 mm (x2) crystal size in stainless steel houding. This product has very good sensitivity and resolution especially on near face and short range detection. -
Adaptor for Ultrasonic cables. -
Angled wedges for use with the ToFD (Time of Flight Diffraction) probes and scanners. -
The X-Series range of Phased Array Transducer offers broad choice in transducer specifications (frequency, element size and quantity) together with the assurance of industry standard configurations. -
Phased Array transducers with DAAH (Detachable Active Array Head) provides a unique phased array transducer solution by splitting the array from the cable. This concept also yields advantages in cost at purchase but also for maintenance in the long run as a cable is much less expensive to repair then replacing a phased array probe. -
High performance linear phased array probes, available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. -
Quick Change Shearwave Transducers & Wedges. (Wedges can be contoured)
Longitudinal and shearwave angle transducer with detachable wedges. Threaded probe end for quick and easy change of angle wedge. Available in 2.25, 5 and 10MHz frequency. -
Knurled rings for Cygnus probes to hold the membrane in place. For use with Single Crystal probes. -
Manufactured in a 30 x 30mm case with gimbal pins, ASSW probes are designed for use with the extensive range of Phoenix manual and automated scanners. Suitable for use in scanners with 30 x 30mm forks for general purpose testing of welds, plate, pipe tubing, castings and forgings -
Flex transducers are ideal for inspecting radius areas of composites and accessing complex geometries in metals, such as weld cap areas or castings. These piezo-electric made transducers are thin, soft, compliant ultrasonic probes that can conform to curved surfaces using finger-tip pressure. -
Phoenix developed the gold series transducer range to offer superior performance. Available with a stainless steel case, modified internal design and rear entry connectors, gold series transducers provide exceptional results. -
Ideal for inspections in areas with reduced access. -
The Single Element WheelProbe uses Sonatest rubber technology for near-dry ultrasonic coupling. -
Single crystal delay line transducers designed for inspection/thickness checking of thin materials. Great near surface resolution and high sensitivity. -
Single crystal 0 degree various frequency and diameter contact probes used for thickness measurements and lamination checks. -
Roller probe transducers designed for continuous thru transmission inspection of attenuative materials and honeycomb structures. -
Soft tip transducers designed for thru transmission spot check inspection of attenuative materials or honeycomb structures
