-
Range of probes available for the Dakota Ultrasonic Thickness Gauges -
Cables for connecting Ultrasonic Transducers to Ultrasonic Flaw Detectors. Available in single and twin cables, with a range of connector options. -
Single crystal probes are used with the gauge in Multiple-Echo mode and allow measurements to be taken ignoring coatings. -
Twin crystal probes are used with the Cygnus gauges in Echo-Echo or Single Echo modes. These types of probes are particularly suited to measuring on heavily corroded metals. -
High-Temperature Twin element probe for the Cygnus 1 Ex ultrasonic thickness gauge. Temperatures up to 300°C. -
Twin element High Temperature Probe for use on surfaces up to 300°C. For use with Cygnus 4+ and Cygnus 6+. -
Single crystal compression wave probes are used to measure thickness and detect flaws on plates, bars, forgings and castings. -
Single crystal 0° compression wave probe with hard face (ceramic) for long life. Very good sensitivity and resolution. For use on smooth and machines surfaces. -
Twin crystal compression wave probes are suitable for use on corroded and pitted surfaces, thickness measurement, brazed joint testing and for lamination detecting. High gain and resolution are achieved with a very low cross-talk. -
The single crystal range of shear wave transducers are available in various angle sizes and ideal for the general purpose testing of welds, plate, pipe tubing, castings and forgings. -
Angle beam shear wave probe with high perfomance Ø10 mm single crystal in stainless steel housing, offering exceptional sensitivity and high resolution for exact and critical inspections. -
Twin crystal shear wave transducers hold two crystals mounted at inward angles that provide improved near-surface resolution and superior signal-to-noise ratio. Ideal for inspecting thin materials for small flaws, occurring directly under the surface. -
Angle beam twin crystal probe with 8 x 5 mm (x2) crystal size in stainless steel houding. This product has very good sensitivity and resolution especially on near face and short range detection. -
Adaptor for Ultrasonic cables. -
Modular pit gauge, for measuring surface variations with precision and ease. Optional magnetic arms (purchased separately) can be added to allow the Gage to be mounted to a ferrous scan surface, even upside down. -
CTB 3 is black magnetic ink in aerosol form for use in MPI. -
CTW 6 is white background contrast paint in aerosol form for use with MPI ink, such as CTB 3. -
CTF 9 is fluorescent magnetic ink in aerosol form for use in MPI. -
CTC 1 is a cleaner in aerosol form. -
Mixed carton of Cracktest aerosols, for use with Fluorescent Method Magnetic Particle Inspection. -
Mixed carton of Cracktest aerosols, for use with Visible Method Magnetic Particle Inspection. -
4.5kg Test weight for use with electromagnetic yokes in accordance with AS2083. -
18kg block for use with D.C. Electromagnetic and Permanent Magnet yokes in accordance with AS2083. -
Cracked aluminium block compares sensitivity of different penetrants or sensitivity of new and old penetrants
