-
The Cygnus G1 Probe Handler is designed for use on Observation, Inspection and Light-work class ROVs. -
The Portascanner® AIRTIGHT is an advanced ultrasonic room integrity testing tool. It can be used to locate and quantify even minor leak sites quickly, easily, and non-destructively. -
The Portascanner® WATERTIGHT PLUS is an ultrasonic watertight integrity tester, for inspecting watertight and weathertight seals on ships and marine structures such as warships and offshore oil & gas platforms. -
The Spectroline Marksman II ultrasonic NDT diagnostic tool finds leaks and component defects long before they lead to equipment breakdown! Features advanced heterodyne circuitry and “Sound Signature Technology” to convert and amplify inaudible ultrasonic sound into audible “natural” sounds. -
The Top Side Repeater is a small display unit that can be used to display the thickness measurements sent from the ROV gauge to the surface. -
Cygnus Battery For Mk3 Intrinsically Safe Ultrasonic Thickness Gauges -
Knurled rings for Cygnus probes to hold the membrane in place. For use with Single Crystal probes. -
Our most popular general purpose couplant. -
Single packet powdered UT couplants provide an economical solution for travel, remote access inspections and storage limitations. EchoMix Single is a one-part (one packet) powder, easily mixed in ambient water in five minutes, providing a strong, continuous coupling film that adheres well to vertical and overhead surfaces. Single mix packet, one step mixing. Available in 1 gallon and 5 gallon packs. -
Couplant for use with the Cygnus Single Crystal Transducers. Used between the membrane, and the probe face. -
Normal incidence shear wave transducers require a stiff, high viscosity couplant to support shear waves. Echo Shear Wave ultrasonic couplant transmits normal incidence (zero degree) shear waves, is nontoxic, water-soluble and easily applied and removed. A small amount of Echo Shear Wave Couplant should be placed on the face of the transducer or the test piece and then pressed into a thin layer. For optimum coupling, it is important that the couplant layer be thin. -
Echo Z+ is a high acoustic-impedance ultrasonic couplant. It increases acoustic impedance and decreases surface noise, making it ideal for very rough, pitted, corroded surfaces or tight-curved test objects, and concrete. Echo Z+ contains no VOCs, naptha, oil, hydrocarbons, silicones, petroleum distillates, dyes or fragrance. Contains a short term ferrous corrosion inhibitor. Echo Z+ contains glycerin and is intended to be removed from non-ferrous metal parts after inspection. -
EchoPure is an ideal couplant for very cold environment inspections and will not frost on test objects causing attenuation at temperatures as low as -60˚F/51˚C. EchoPure is also excellent for ambient and elevated temperature use such as warm welds up to 350˚F and on pipe in the desert summer sun, where slow evaporation and long inspection windows are desired. Available in 3 viscosities: Low viscosity fluid, medium viscosity gel, and high viscosity gel. -
Cygnus Battery for Cygnus UW Ultrasonic Thickness Gauges -
Johnson and Allen MC260 AC/DC Magnetising Demagnetising Coil. 260mm Aperture, AC/DC. -
Entry level coating thickness gauge -
CPG-1 Digital Pit gauge with 60mm foot -
Reversible foot for CPG-1 Digital Pit Gauge -
The perfect accessory for the AccuMAX Series meter. Ideal for technicians performing radiographic examinations. Meets ASTM E1742 standard. -
Water Washable Red Penetrant Aerosol 300gm -
D-100 Developer for Penetrants -
DR-60 - Clear, non-chlorinated solvent for pre-cleaning and penetrant wipe-off. -
Dye Penetrant - Fluorescent Water Washable Aerosol
