-
The Veo3 is the latest portable Ultrasonic Phased Array Flaw Detector from Sonatest. Features FMC/TFMi and new PCAP touch screen interface. -
2D matrix array ultrasonic imager scanner for the inspection of composite materials. -
The RSflite, UTmap and WheelProbe2 linear array solution. Fast, integrated and portable, this is an impressive NDT solution for composite inspection. -
Phased Array Wheel Probe for Corrosion Mapping, Marine Inspection, Aerospace Fuselage Inspection, Aerospace Large Area scanning, and Automotive Testing. As the best alternative to immersion inspection, the WheelProbe 2 offers an impressive 1mm near surface resolution in the latest composite materials using a 5MHz array. Available also with 10MHz, 3.5MHz and 2MHz versions, the WP2 is capable of measuring flaws in other more attenuating materials. Weighing only 1Kg and 45% lighter than the earlier generation, this more versatile model offers distinct advantages for the operator, especially when scanning large areas upside down. -
The X-Series range of Phased Array Transducer offers broad choice in transducer specifications (frequency, element size and quantity) together with the assurance of industry standard configurations. -
Phased Array transducers with DAAH (Detachable Active Array Head) provides a unique phased array transducer solution by splitting the array from the cable. This concept also yields advantages in cost at purchase but also for maintenance in the long run as a cable is much less expensive to repair then replacing a phased array probe. -
High performance linear phased array probes, available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. -
This simple and versatile encoding device is ideal for single-axis manual phased array inspections including: Pipe and vessel welds, Bolt hole crack detection, Linear array corrosion mapping, B and D-scans. -
The Bracelet scanner has been optimised for testing circumferential welds in small bore pipework with ultrasonic phased array transducers. -
Drive is an ‘all-in-one’ scanner controller, capable of manipulating one to four motorised axes simultaneously in a precisely controlled and coordinated manner. Using Linear Amplifiers, rather than noisy pulse width modulation, Drive can produce 150W of motor power, with minimal interference to UT, TOFD, PA and EC signals, enhancing inspection quality and reducing inspection time. -
An ultra-low noise, wide bandwidth, fixed-gain 40dB TOFD PreAmplifier, suitable for use with any ultrasonic transducers and system. -
Flex transducers are ideal for inspecting radius areas of composites and accessing complex geometries in metals, such as weld cap areas or castings. These piezo-electric made transducers are thin, soft, compliant ultrasonic probes that can conform to curved surfaces using finger-tip pressure. -
MagMan can be configured for inspecting either circumferential or longitudinal pipe welds. It is ideal for inspections requiring a combination of phased array and one or more TOFD pairs or multiple pulse-echo transducers. The MagMan has large magnetic wheels that provide a stable platform and a smooth rolling motion. The frame includes angular adjustment to enable the scanner to be used on small diameter pipes, and can hold up to twelve transducers, arranged as six pairs on either side of the weld. -
The Duo scanner is a robust, ergonomic scanning frame with operator-friendly features offering fast setup and reliable, repeatable TOFD inspections of pipe welds, from 2”OD up to flat plate. -
The MapMan is a modular two axis scanner that is ideal for corrosion mapping. It is available with magnetic wheels for inspecting steel pipes and vessels or alternatively belts for inspecting pipes of any other material. -
The MultiMag is a compact scanner suitable for circumferential weld testing of steel pipes. It features magnetic wheels that can be repositioned along the scanner frame, can hold up to four transducers (phased array, TOFD, single element), and incorporates compliance in the wheels to assist when inspecting misaligned welds. -
NozzleScan is a versatile, low-profile manual scanning solution developed for the inspection of nozzle welds in both set-through and set-on configurations. -
R-Evolution is an ultrasonic phased array probe housed in a light-weight glycerine-filled roller, delivering fast immersion quality C-scan inspections in the palm of your hand. Designed to minimise operator fatigue, R-Evolution is small and light making it ideal for use on large areas and particularly overhead inspections. -
SAW Bug is a motorised, magnetic-wheeled buggy that can carry up to six ultrasonic transducers. It is designed for single axis automated inspections of circumferential welds on carbon steel pipelines from 4”OD up to flat. With a four-wheel drive system, the magnetic buggy has excellent grip and drive power and delivers constant speed whether ascending or descending the inspection surface. -
Sp-Arc is a unique mapping tool for measuring wall thickness longitudinally along small bore ferritic pipes, enabling continuous corrosion assessment along unlimited lengths. The scanner houses a curved ultrasonic array probe immersed in a water box with a compliant, low-friction foam seal. -
The Swipe is a two axis scanner for c-scan inspection of flat or curved components of any material. It features automatic brakes on both axes for stability and is available with interchangeable scanning rails of different widths. It is ideal for use with linear phased array transducers. -
A compact, lightweight, user friendly single-axis scanner, the TOFD Caliper is the perfect tool to provide a quick and simple, manual weld inspection. It is very easy to setup with the probe separation being adjusted from a single thumb screw. -
Tracer is a versatile freehand scanning system that calculates and outputs accurate X-Y positional data for C-scan inspections without the constraints of a scanning frame. Tracer is ideally suited to operate with linear array probes to provide a fast, simple and flexible portable C-scan inspection kit. -
WrapIt is a flexible ultrasonic phased array probe that conforms to the shape of the component. -
A handheld, single axis scanner ideal for TOFD inspection of welds of any material. The WREN can be operated using one hand so is particularly operator-friendly for site use, especially in areas with limited access. -
Sonatest Flaw Detector designed specifically for Rail Testing.
